Description
Viking Access Systems VA-F1ARM20 Multi-Part Arm Assembly – F-1, R-6 & T-21 Swing Gate Operator Replacement Part
Product Overview
The Viking Access Systems VA-F1ARM20 Multi-Part Arm Assembly is a genuine OEM replacement articulated gate arm assembly designed for compatible Viking F-1, R-6, and T-21 automatic swing gate operators, including applicable first-generation, revised, and solar-powered configurations.
The VA-F1ARM20 serves as the mechanical linkage between the gate operator's output arm and the swing gate. As the operator's motor and gearbox generate rotational movement, the multi-part arm assembly transfers that movement to the gate, allowing it to open and close through its intended travel range.
This articulated arm configuration accommodates the changing angles between the operator and gate throughout the operating cycle. Proper arm geometry, mounting position, and mechanical alignment are essential for smooth gate movement and efficient operation.
The VA-F1ARM20 is identified in Viking's F-1 and R-6 replacement-parts documentation as the standard multi-part arm assembly. It is also listed for compatible T-21 applications, making it a replacement option for maintaining several Viking swing gate operator families.
Whether replacing a bent or damaged arm, repairing worn mechanical linkage, or restoring the original articulated-arm configuration, the Viking VA-F1ARM20 Multi-Part Arm Assembly provides an OEM replacement solution for professional automatic gate operator service.
Key Features
-
Genuine Viking Access Systems Replacement Part – OEM articulated arm assembly for compatible Viking automatic swing gate operators.
-
Multi-Part Articulated Design – Provides the mechanical linkage required to transfer operator movement to the swing gate.
-
F-1 Compatibility – Designed for applicable Viking F-1 swing gate operators, including first-generation configurations.
-
R-6 Compatibility – Supports compatible Viking R-6 swing gate operators, including Revision 1 and Revision 2.
-
R-6 Solar Compatibility – Listed for applicable Viking R-6 Solar gate operator installations.
-
T-21 Compatibility – Suitable for compatible Viking T-21 and T-21 Gen 1 swing gate operators.
-
Adjustable Installation Geometry – Arm extension positioning is established according to the operator's installation dimensions.
-
Mechanical Power Transfer – Connects the operator's output mechanism to the gate for controlled opening and closing.
-
Standard Arm Configuration – Identified as the standard multi-part arm assembly in applicable Viking F-1 documentation.
-
Replacement for Damaged Linkage – Ideal for replacing bent, worn, damaged, or improperly functioning gate arm components.
-
Professional Gate Automation Application – Intended for automatic swing gate installation, maintenance, and repair.
Compatibility
The Viking VA-F1ARM20 Multi-Part Arm Assembly is listed for the following Viking Access Systems swing gate operators:
Viking F-1 Series
-
Viking F-1 Swing Gate Operators
-
Viking F-1 Gen 1 Swing Gate Operators
Viking R-6 Series
-
Viking R-6 Swing Gate Operators
-
Viking R-6 Revision 1 Swing Gate Operators
-
Viking R-6 Revision 2 Swing Gate Operators
-
Viking R-6 Solar Swing Gate Operators
Viking T-21 Series
-
Viking T-21 Swing Gate Operators
-
Viking T-21 Gen 1 Swing Gate Operators
Important Compatibility Note: The VA-F1ARM20 is identified in Viking F-1 and R-6 parts documentation and is listed for applicable T-21 installations.
Arm geometry and mounting requirements can vary by operator generation, gate dimensions, and installation configuration. Confirm the existing arm assembly and applicable Viking installation manual before ordering, particularly for first-generation operators.
The VA-F1ARM20 should not be confused with the DWAR20 Output Arm, which is a separate component attached to the operator's output mechanism.
Product Specifications
-
Manufacturer: Viking Access Systems
-
Part Number: VA-F1ARM20
-
Product Type: Multi-Part Arm Assembly
-
Arm Configuration: Articulated Swing Gate Arm
-
Component Category: Mechanical Gate Operator Linkage
-
Application: Automatic Swing Gate Operators
-
Compatible Operator Families: Viking F-1, R-6, and T-21
-
F-1 Applications: F-1 and F-1 Gen 1
-
R-6 Applications: R-6, Revision 1, Revision 2, and Solar
-
T-21 Applications: T-21 and T-21 Gen 1
-
Function: Transfers Mechanical Movement from Operator to Swing Gate
-
Installation Location: Between Operator Output Arm and Gate Mounting Point
-
Arm Adjustment: Installation-Specific Geometry and Extension Length
-
Related Output Arm: Viking DWAR20
-
Related Clutch Assembly: Viking DWCL20
-
R-6 Parts Diagram Reference: Item #32 in applicable newer diagrams
-
F-1 Parts Diagram Reference: Item #34 in applicable diagrams
-
Replacement Type: Genuine OEM Mechanical Replacement Assembly
What's Included
-
(1) Viking Access Systems VA-F1ARM20 Multi-Part Arm Assembly
The assembly is supplied as the manufacturer's multi-part arm replacement. Exact individual components and hardware should be confirmed against the current supplier package contents.
The operator's internal output arm, clutch assembly, output shaft, motor, gearbox, and other operator components are not included unless otherwise specified.
Installation and Application Information
The Viking VA-F1ARM20 Multi-Part Arm Assembly is installed between the automatic swing gate operator and the gate itself.
During powered operation, the operator's motor drives the gearbox and output shaft, rotating the external output arm. The articulated multi-part arm assembly transfers this motion to the swing gate, allowing the gate to move through its designated opening and closing range.
Unlike a rigid single-piece linkage, the articulated arm changes its operating angle throughout gate travel. Correct positioning and adjustment are essential for proper gate movement.
Viking's installation instructions specify that the arm extensions must be positioned and adjusted according to the operator's mounting geometry and gate dimensions. Depending on the installation, extension components may require trimming to the appropriate length.
Common reasons for replacing the arm assembly include:
-
Bent or damaged arm sections
-
Excessive movement or looseness at articulation points
-
Worn or damaged linkage connections
-
Improper gate movement caused by damaged linkage
-
Mechanical interference during opening or closing
-
Corrosion or deterioration of existing arm components
-
Replacement of missing or incomplete gate arm hardware
Recommended inspection points during replacement:
-
Operator output arm and shaft connection
-
Clutch engagement and condition
-
Arm pivot points and mechanical joints
-
Gate-side mounting bracket and attachment
-
Operator mounting position
-
Gate hinge condition and alignment
-
Full opening and closing clearance
-
Proper arm geometry throughout the operating cycle
Installation Considerations
-
Disconnect electrical and battery power and secure the gate against unexpected movement.
-
Verify the operator model and correct arm assembly configuration.
-
Inspect the gate hinges and operator mounting structure.
-
Position the arm components according to the applicable Viking installation dimensions.
-
Adjust or trim arm extensions only as directed by the manufacturer's installation instructions.
-
Secure the arm assembly to the operator and the appropriate structural mounting point on the gate.
-
Check the full gate travel manually before restoring powered operation.
-
Verify open and close limits, mechanical clearances, and required entrapment protection devices.
Important: Viking installation instructions caution against attaching the gate bracket only to decorative pickets or other insufficiently supported gate members. The bracket must be secured to an adequately reinforced structural portion of the gate.
Professional installation by a qualified automatic gate technician is recommended.
Why Buy From GatePoint Solutions?
At GatePoint Solutions, we specialize in genuine automatic gate operator replacement parts, access control equipment, and professional gate automation components.
Our selection of Viking Access Systems replacement parts supports professional gate installers, service technicians, and property owners maintaining Viking F-1, R-6, T-21, and other automatic gate systems.
Whether you need a Viking multi-part arm assembly, output arm, clutch and handle assembly, output shaft, gearbox, motor, drive chain, limit switch, or control board, GatePoint Solutions provides access to OEM components for automatic gate operator maintenance and repair.
Shop Viking Access Systems replacement parts at GatePoint Solutions for professional automatic gate operator repair, maintenance, and replacement solutions.
Important Ordering Information
Verify your Viking operator model, manufacturing generation, and existing articulated arm configuration before purchasing.
The VA-F1ARM20 is a multi-part articulated arm assembly, not the individual DWAR20 output arm attached to the operator.
The arm assembly may require installation-specific adjustment or trimming according to the manufacturer's mounting geometry instructions.
For first-generation F-1 and T-21 applications, confirm the existing arm configuration and mounting dimensions before ordering.
The exact hardware and individual pieces included should be verified against the current manufacturer's package contents.
Disconnect electrical and battery power, secure the gate against unexpected movement, and follow Viking Access Systems installation instructions before performing mechanical repairs.
After installation, verify proper arm geometry, gate movement, travel limits, mechanical clearance, and all required safety functions before returning the operator to service.

