Description
Viking Access Systems DWLC10B Limit Cam & Holder – F-1, R-6 & T-21 Swing Gate Operator Replacement Part
Product Overview
The Viking Access Systems DWLC10B Limit Cam & Holder is a genuine OEM replacement mechanical limit assembly designed for compatible Viking F-1, R-6, and T-21 automatic swing gate operators, including applicable first-generation, revised, and solar-powered configurations.
This replacement assembly is an essential component of the operator's mechanical travel limit system. The limit cams rotate with the operator's output shaft and activate the corresponding open and close limit switches, allowing the control board to recognize when the gate has reached its designated stopping positions.
Properly functioning limit cams are critical for consistent automatic gate operation. Worn, cracked, loose, or slipping limit cams can interfere with travel limit detection, potentially causing inaccurate stopping positions or unreliable gate movement.
The DWLC10B provides a manufacturer-specified replacement solution for maintaining the mechanical limit system on compatible Viking swing gate operators.
Whether servicing a residential driveway gate, replacing a damaged limit cam assembly, or restoring an earlier-generation Viking gate operator, the DWLC10B Limit Cam & Holder helps maintain proper gate travel adjustment and reliable mechanical limit activation.
Key Features
-
Genuine Viking Access Systems Replacement Part – OEM limit cam and holder assembly for compatible Viking automatic swing gate operators.
-
Multiple Operator Compatibility – Designed for compatible Viking F-1, R-6, and T-21 swing gate operator families.
-
First-Generation Applications – Listed for applicable Viking F-1 Gen 1 and T-21 Gen 1 configurations, subject to revision verification.
-
R-6 Revision Compatibility – Supports applicable R-6 Revision 1 and Revision 2 operators.
-
R-6 Solar Applications – Compatible with applicable Viking R-6 solar-powered gate operators.
-
Mechanical Travel Limit Control – Works with the operator's mechanical limit switches to identify fully open and fully closed gate positions.
-
Adjustable Limit Cam Configuration – Allows technicians to establish the proper gate stopping positions according to Viking adjustment procedures.
-
Output Shaft Integration – Operates with the corresponding mechanical output shaft and limit switch system.
-
Factory Replacement Assembly – Replaces the corresponding DWLC10B limit cam and holder components.
-
Professional Gate Operator Maintenance – Suitable for qualified automatic gate installers and service technicians.
Compatibility
The Viking DWLC10B Limit Cam & Holder is listed for the following Viking Access Systems swing gate operator families:
Viking F-1 Series
-
Viking F-1 Swing Gate Operators
-
Viking F-1 Gen 1 Swing Gate Operators
Viking R-6 Series
-
Viking R-6 Swing Gate Operators
-
Viking R-6 Revision 1 Swing Gate Operators
-
Viking R-6 Revision 2 Swing Gate Operators
-
Viking R-6 Solar Swing Gate Operators
Viking T-21 Series
-
Viking T-21 Swing Gate Operators
-
Viking T-21 Gen 1 Swing Gate Operators
Important Compatibility Note: Earlier Viking F-1, R-6, and T-21 operator manuals may identify the original limit cam and holder as DWLC10, while newer operator documentation identifies DWLC10B.
Although the DWLC10B is listed for these operator families, compatibility with earlier-generation assemblies should be verified before ordering. Compare the existing cam assembly, operator manufacturing revision, and applicable parts diagram.
Product Specifications
-
Manufacturer: Viking Access Systems
-
Part Number: DWLC10B
-
Product Type: Limit Cam & Holder Assembly
-
Component Category: Mechanical Travel Limit System Replacement Part
-
Application: Automatic Swing Gate Operator
-
Compatible Operator Families: Viking F-1, R-6, and T-21
-
First-Generation Applications: F-1 Gen 1 and T-21 Gen 1
-
R-6 Applications: R-6, Revision 1, Revision 2, and Solar
-
Function: Mechanical Activation of Open and Close Travel Limit Switches
-
Limit System Type: Mechanical Cam-Actuated Limit Switch System
-
Related Limit Switch Part: Viking DULS10
-
Earlier Limit Cam Part Number: DWLC10 (verify replacement compatibility)
-
R-6 Parts Diagram Reference: Item #9 in newer R-6 documentation
-
F-1 Parts Diagram Reference: Item #14 in newer F-1 documentation
-
Installation Location: Output Shaft / Mechanical Limit Switch Assembly
-
Replacement Type: Genuine OEM Mechanical Replacement Assembly
What's Included
-
(1) Viking Access Systems DWLC10B Limit Cam & Holder Assembly
Mechanical limit switches, limit switch holders, wiring harnesses, output shafts, and other gate operator components are sold separately unless otherwise specified.
Installation and Application Information
The Viking DWLC10B Limit Cam & Holder operates within the mechanical travel limit system of compatible Viking automatic swing gate operators.
During normal operation, the operator's output shaft rotates as the motor and gearbox move the swing gate. The limit cams rotate with the shaft and engage the corresponding mechanical limit switches at the designated open and close stopping positions.
These switches communicate with the operator's control board, allowing the gate operator to recognize when the intended travel limit has been reached.
A damaged or improperly adjusted limit cam assembly may contribute to:
-
Incorrect fully open or fully closed gate positions
-
Inconsistent gate stopping locations
-
Limit cams slipping out of adjustment
-
Failure to activate the mechanical limit switches
-
Excessive gate travel beyond the intended stopping point
-
Mechanical interference or unreliable limit detection
When replacing the DWLC10B assembly, technicians should inspect the following related components:
-
Open and close mechanical limit switches
-
Limit switch holder and mounting hardware
-
Limit switch wiring harness
-
Output shaft condition and alignment
-
Limit cam engagement and adjustment
-
Gate arm linkage and mechanical travel
After installation, both the open and close limit cams must be adjusted according to the applicable Viking Access Systems installation manual.
Verify correct switch activation, gate stopping positions, and all required safety functions before returning the gate operator to normal service.
Professional installation by a qualified gate automation technician is recommended.
Why Buy From GatePoint Solutions?
At GatePoint Solutions, we specialize in genuine automatic gate operator replacement parts, access control equipment, and professional gate automation components.
Our selection of Viking Access Systems replacement parts supports professional gate installers, service technicians, and property owners maintaining Viking F-1, R-6, T-21, and other automatic gate systems.
Whether you need a Viking limit cam and holder, mechanical limit switches, limit switch bracket, output shaft, clutch assembly, gearbox, motor, or control board, GatePoint Solutions provides access to OEM components for automatic gate operator maintenance and repair.
Shop Viking Access Systems replacement parts at GatePoint Solutions for professional gate automation repair and maintenance solutions.
Important Ordering Information
Verify your Viking operator model, manufacturing generation, and existing limit cam assembly before purchasing.
Earlier operator revisions may use the DWLC10 configuration. Confirm that DWLC10B is appropriate for your specific operator before ordering.
The DWLC10B includes the replacement limit cam and holder assembly only. Mechanical limit switches, wiring harnesses, and other related components are not included unless otherwise specified.
Disconnect electrical and battery power, secure the gate against unexpected movement, and follow Viking Access Systems service instructions before performing repairs.
After installation, adjust and test the open and close travel limits and verify all required gate safety functions before returning the system to service.

