{"title":"HDSW24UL","description":"","products":[{"product_id":"liftmaster-hdsw24ul-24vdc-heavy-duty-swing-gate-operator","title":"LiftMaster HDSW24UL 24VDC Heavy-Duty Swing Gate Operator","description":"\u003cdiv\u003e\n\u003cp\u003e\nMeet the LiftMaster HDSW24UL, a 24VDC heavy-duty swing gate operator designed for high-load, high-traffic commercial and industrial environments. It delivers exceptional torque, reliability, and smart access control for gates up to 4,500 lbs with a reinforced long arm and up to 22 ft in length.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eGate capacity\u003c\/b\u003e: Standard arm supports up to 2,800 lbs; reinforced long arm (HDLGARM) enables up to 4,500 lbs for gates 14–22 ft long\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePowertrain\u003c\/b\u003e: Custom heavy-duty gearbox (Size 80) with a 1,600:1 direct-drive gear ratio; 1.5 HP peak brushless DC motor rated for up to 6 million cycles; designed for continuous-duty, high-cycle operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOpening speed\u003c\/b\u003e: Variable gate speed from 13–36 seconds per 90° opening; smooth start\/stop with mid-travel reversal\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction \u0026amp; footprint\u003c\/b\u003e: 1\/4\" powder-coated steel chassis with a UV-resistant、高-density cover; 249 lb unit footprint: 28.04\" H × 16.37\" W × 19.59\" D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafety \u0026amp; compliance\u003c\/b\u003e: UL Listed with monitored entrapment protection; Posilock auto-close protection; Quick Close \u0026amp; Anti-Tailgate; inherent reversing sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSmart access\u003c\/b\u003e: Powered by myQ® Technology; supports Smart Community Access \u0026amp; Smart Facility Access (requires cellular data or Wi‑Fi); centralized multi-site monitoring and control; wireless dual-gate communication\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIndependent controls\u003c\/b\u003e: Individual speed configuration per gate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafety accessories included\u003c\/b\u003e: LMRRUL Monitored Retroreflective Photo Eye; manual disconnect for emergency operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower \u0026amp; flexibility\u003c\/b\u003e: 120\/240V single-phase input; 24VDC 1A max accessory power output (switched and unswitched); Optional 3-Phase Conversion Kit (3PHCONV)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower options\u003c\/b\u003e: Solar-ready ultra-reliable power system; heater option not recommended for solar applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOperating environment\u003c\/b\u003e: Without heater: -4°F to 140°F (-20°C to 60°C); With heater: -40°F to 140°F (-40°C to 60°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWarranty\u003c\/b\u003e: 5-year commercial \/ 7-year residential\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nDesigned to outperform in demanding settings, the HDSW24UL integrates enterprise-grade safety, scalable access control, and rugged construction. It’s an ideal choice for facilities that require reliable perimeter security, remote monitoring across multiple sites, and seamless integration with modern access systems. Whether you’re managing a busy industrial yard, a gated parking facility, or a secure campus entrance, this operator provides precise, quiet operation, durable performance, and the peace of mind that comes with robust safety features and long-term support.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46512058564783,"sku":"GPS-LM-HDSW24UL","price":3424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/LiftMaster_HDSW24UL_GatePoint_Solutions.jpg?v=1779119609"},{"product_id":"liftmaster-k09-50119-output-arm-q059","title":"LiftMaster K09-50119 OUTPUT ARM, Q059","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K09-50119 Output Arm is a replacement component for LiftMaster gate operators, serving as the mechanical link that translates the operator’s motor action into gate movement.\u003c\/p\u003e \u003cp\u003eIn practical installations, this output arm is used during routine maintenance or when the original arm shows wear, deformation, or failure to actuate the gate smoothly. It plays a critical role in residential driveways, commercial entrances, and other access-controlled perimeters where reliable gate operation is essential. When paired with the appropriate control system and mounting hardware, it supports consistent opening and closing cycles and helps maintain proper alignment with the gate and safety devices.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for use with LiftMaster gate operators that require the K09-50119 output arm (Q059). This replacement is commonly used within LiftMaster installations that share this actuator linkage configuration.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709862564015,"sku":"GPS-LM-K09-50119","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_91.jpg?v=1774890834"},{"product_id":"liftmaster-k13-36117-1-cludge-cover","title":"LiftMaster K13-36117-1 CLUDGE COVER","description":"\u003cdiv\u003e\n\u003cp\u003eThe K13-36117-1 Cludge Cover is a replacement exterior cover for LiftMaster gate operators, designed to replace a damaged or missing housing to restore the operator’s protected exterior.\u003c\/p\u003e \u003cp\u003eUsed by installers and maintenance technicians during field service, this cover supports quick restoration of outdoor gate installations. It helps maintain the appearance and integrity of the operator housing on entrances, parking gates, and perimeter security systems, enabling faster downtime recovery without replacing the entire unit.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for LiftMaster gate operators that require the K13-36117-1 cover. Suitable for LiftMaster systems and housing configurations that use this cover style.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709865578671,"sku":"GPS-LM-K13-36117-1","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_90.jpg?v=1774890617"},{"product_id":"liftmaster-k1d7078-emi-board","title":"LiftMaster K1D7078 EMI BOARD","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K1D7078 EMI BOARD is a replacement electronic module that provides the essential control signaling required by LiftMaster gate operators.\u003c\/p\u003e \u003cp\u003eIn practical field use, technicians replace this EMI board during service when the operator’s control circuitry exhibits faults or signal inconsistencies between the main processor and peripheral components. Replacing the EMI board helps restore reliable gate cycling and consistent responses from safety sensors and related interfaces in commercial entrances, HOA communities, and secure access points.\u003c\/p\u003e \u003cp\u003eCompatible with LiftMaster gate operators that specify the K1D7078 EMI BOARD as the replacement part.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709869871279,"sku":"GPS-LM-K1D7078","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T170905.730.jpg?v=1775081353"},{"product_id":"liftmaster-k1d8387-1cc-expansion-board-ul325","title":"LiftMaster K1D8387-1CC EXPANSION BOARD, UL325","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K1D8387-1CC Expansion Board is a replacement module that extends the control capabilities of compatible gate operators, providing additional interface options within the controller enclosure.\u003c\/p\u003e \u003cp\u003eIn practical installations, this expansion board is used during system upgrades or field replacements to maintain reliable access control in commercial gates, parking facilities, and multi-tenant properties. It helps technicians preserve existing controller architecture while enabling expanded integration with peripheral devices and ancillary systems, supporting smoother retrofits and reduced downtime.\u003c\/p\u003e \u003cp\u003eCompatible with LiftMaster gate operators that support the K1D8387-1CC expansion board; verify model compatibility in the operator’s service manual before installation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709870067887,"sku":"GPS-LM-K1D8387-1CC","price":217.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_59.jpg?v=1774628640"},{"product_id":"liftmaster-k41-0047-000-wire-harness-hd-gates","title":"LiftMaster K41-0047-000 WIRE HARNESS, HD GATES","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eLiftMaster K41-0047-000 Wire Harness for HD Gates\u003c\/strong\u003e is a replacement wiring harness offered by GatePoint Solutions that provides the essential interconnects between a LiftMaster gate operator and its field devices, ensuring reliable power delivery and signal transmission across the system.\u003c\/p\u003e \u003cp\u003eIn real-world installations, technicians swap this harness during routine maintenance, after insulation or wiring damage, or when upgrading to a replacement harness on heavy-duty gate setups. It acts as the primary conduit for control commands from the operator’s control board to the gate drive components and for feedback signals that help confirm gate status, supporting consistent performance in high-traffic entrances and perimeter access points.\u003c\/p\u003e \u003cp\u003eCompatibility and scope: This harness is designed for LiftMaster HD Gates and is intended for use with LiftMaster heavy-duty gate operators that require this part number. When replacing worn or damaged wiring, verify compatibility with your specific LiftMaster system and ensure the connector interfaces align with the K41-0047-000 harness.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709873148079,"sku":"GPS-LM-K41-0047-000","price":245.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T170817.486.jpg?v=1775081304"},{"product_id":"liftmaster-k41-0050-000-reset-with-id-resistor-hdsw24ul","title":"LiftMaster K41-0050-000 RESET WITH ID RESISTOR, HDSW24UL","description":"","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709873213615,"sku":"GPS-LM-K41-0050-000","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T172114.739.jpg?v=1775082081"},{"product_id":"liftmaster-k41-0066-000-gear-reducer-1600-1-hdsw24ul","title":"LiftMaster K41-0066-000 GEAR REDUCER, 1600:1, HDSW24UL","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K41-0066-000 Gear Reducer provides 1600:1 gear reduction in the gate operator drive train, serving as a direct replacement to restore proper torque and controlled gate movement.\u003c\/p\u003e \u003cp\u003eIn practice, this part is used during service or refurbishment of LiftMaster gate operators to convert motor speed into the high-torque output required to move gates reliably. It supports consistent opening and closing cycles in commercial properties, gated communities, and larger residential installations where heavy or frequent operation is expected. Replacing a worn reducer helps minimize stalling, jitter, and uneven travel, contributing to lower maintenance downtime and longer overall system life.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for LiftMaster gate operators that use the K41-0066-000 gear reduction assembly at a 1600:1 ratio, including configurations associated with HDSW24UL. Verify your operator’s service manual or part number to confirm exact compatibility before replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709873442991,"sku":"GPS-LM-K41-0066-000","price":2172.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T172006.794.jpg?v=1775082017"},{"product_id":"liftmaster-k41-0067-000-transformer-hd-swing-and-slide","title":"LiftMaster K41-0067-000 TRANSFORMER, HD SWING AND SLIDE","description":"\u003cdiv\u003e\n\u003cp\u003eThe K41-0067-000 transformer is a replacement power transformer for LiftMaster HD Swing and Slide gate operators, providing the low-voltage supply needed to power the control board and actuation circuitry.\u003c\/p\u003e\n\u003cp\u003eIn practical installations, it serves as the reliable power source that enables opening and closing cycles, powers safety devices, and supports connected peripherals such as keypads, remotes, and monitoring sensors. Use this transformer when repairing a failed power supply or when performing routine maintenance on HD swing and slide systems to ensure consistent performance and easier serviceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Designed for LiftMaster HD Swing and Slide gate operators. Verify the part number (K41-0067-000) against your unit to ensure proper fit and safe operation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709873475759,"sku":"GPS-LM-K41-0067-000","price":363.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T170125.857.jpg?v=1775080893"},{"product_id":"liftmaster-k41-0071-000-hd-power-board","title":"LiftMaster K41-0071-000 HD POWER BOARD","description":"\u003cdiv\u003e\n\u003cp\u003eThe \u003cstrong\u003eLiftMaster K41-0071-000\u003c\/strong\u003e HD Power Board is a replacement power board designed to restore the drive and control functions in compatible LiftMaster gate operators.\u003c\/p\u003e \u003cp\u003eIn practical installations, this board serves as the central electronics that manage motor control, safety interlocks, and feedback signals. It is commonly used during service events where the original power board has failed or is out of spec, helping minimize downtime in commercial and industrial gate systems and ensuring reliable gate operation in high-traffic access environments.\u003c\/p\u003e \u003cp\u003eCompatibility: This part is intended for LiftMaster HD gate operator systems that require the K41-0071-000 HD Power Board as a replacement component. It supports maintenance and repair workflows within the LiftMaster HD family.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709873574063,"sku":"GPS-LM-K41-0071-000","price":168.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T165929.874.jpg?v=1775080777"},{"product_id":"liftmaster-k41-0072-000-relay-adapter-board-hd","title":"LiftMaster K41-0072-000 RELAY ADAPTER BOARD HD","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K41-0072-000 Relay Adapter Board is a replacement internal component that provides a reliable relay interface for compatible LiftMaster gate operators.\u003c\/p\u003e \u003cp\u003eIn practical terms, technicians install this board during maintenance, service, or retrofit projects to restore proper relay actuation and ensure dependable gate activation. It serves as the bridge between the operator's control logic and the relay outputs that drive the gate arm, signaling devices, and related access-control components, supporting reliable performance in both commercial and residential installations.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for LiftMaster gate operator configurations that require a dedicated relay adapter, this part is commonly used where a relay-driven activation path exists within the operator's control cabinet.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709873606831,"sku":"GPS-LM-K41-0072-000","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T165834.445.jpg?v=1775080723"},{"product_id":"liftmaster-k41-0073-000mc-hd-main-control-board","title":"LiftMaster K41-0073-000MC Heavy-Duty Main Control Board Service Kit","description":"\u003cp data-start=\"16\" data-end=\"505\"\u003eThe \u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003eLiftMaster\u003c\/span\u003e\u003c\/span\u003e K41-0073-000MC is an OEM Heavy-Duty Main Control Board Service Kit designed for LiftMaster® heavy-duty commercial slide and swing gate operators. Engineered for professional service, repair, and replacement applications, this control board restores essential operator functionality including gate logic control, monitored safety input management, accessory communication, and system operation for high-cycle commercial access control environments.\u003c\/p\u003e\n\u003cp data-start=\"507\" data-end=\"915\"\u003eDesigned as a genuine LiftMaster® replacement kit, the K41-0073-000MC is compatible with multiple LiftMaster® heavy-duty commercial gate operators utilized in industrial facilities, secured commercial properties, distribution centers, and high-traffic perimeter security applications. This replacement board supports monitored safety functionality and is intended for use in UL325-compliant operator systems.\u003c\/p\u003e\n\u003cp data-start=\"917\" data-end=\"1074\"\u003eAlways verify compatibility using the operator installation manual or replacement parts diagram prior to ordering to ensure proper fitment and configuration.\u003c\/p\u003e\n\u003ch2 data-section-id=\"tvikk1\" data-start=\"1076\" data-end=\"1094\"\u003eSpecifications:\u003c\/h2\u003e\n\u003cul data-start=\"1096\" data-end=\"1494\"\u003e\n\u003cli data-section-id=\"kb1j76\" data-start=\"1096\" data-end=\"1127\"\u003ePart Number: K41-0073-000MC\u003c\/li\u003e\n\u003cli data-section-id=\"krwjpq\" data-start=\"1128\" data-end=\"1187\"\u003eProduct Type: Heavy-Duty Main Control Board Service Kit\u003c\/li\u003e\n\u003cli data-section-id=\"vlnca6\" data-start=\"1188\" data-end=\"1216\"\u003eManufacturer: LiftMaster\u003c\/li\u003e\n\u003cli data-section-id=\"w6nxg7\" data-start=\"1217\" data-end=\"1284\"\u003eApplication: Heavy-Duty Commercial Slide \u0026amp; Swing Gate Operators\u003c\/li\u003e\n\u003cli data-section-id=\"1m0gqdv\" data-start=\"1285\" data-end=\"1314\"\u003eOEM Replacement Part: Yes\u003c\/li\u003e\n\u003cli data-section-id=\"d0r2gk\" data-start=\"1315\" data-end=\"1348\"\u003eGenuine LiftMaster® Part: Yes\u003c\/li\u003e\n\u003cli data-section-id=\"6d1tif\" data-start=\"1349\" data-end=\"1400\"\u003eInstallation Type: Replacement \/ Service Repair\u003c\/li\u003e\n\u003cli data-section-id=\"1kn8tfa\" data-start=\"1401\" data-end=\"1426\"\u003eUL325 Compatible: Yes\u003c\/li\u003e\n\u003cli data-section-id=\"ynsoum\" data-start=\"1427\" data-end=\"1494\"\u003eApplication Type: Commercial \/ Industrial Gate Operator Service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-section-id=\"1sz9osj\" data-start=\"1496\" data-end=\"1532\"\u003eCompatible Models \/ Applications:\u003c\/h2\u003e\n\u003cp data-start=\"1534\" data-end=\"1597\"\u003eCompatible with the following LiftMaster® gate operator models:\u003c\/p\u003e\n\u003cul data-start=\"1599\" data-end=\"1654\"\u003e\n\u003cli data-section-id=\"arxexw\" data-start=\"1599\" data-end=\"1611\"\u003eHDSL24UL\u003c\/li\u003e\n\u003cli data-section-id=\"epkxhm\" data-start=\"1612\" data-end=\"1626\"\u003eHDSL24ULMC\u003c\/li\u003e\n\u003cli data-section-id=\"1uj93i7\" data-start=\"1627\" data-end=\"1639\"\u003eHDSW24UL\u003c\/li\u003e\n\u003cli data-section-id=\"4swtqp\" data-start=\"1640\" data-end=\"1654\"\u003eHDSW24ULMC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1656\" data-end=\"1677\"\u003eApplications include:\u003c\/p\u003e\n\u003cul data-start=\"1679\" data-end=\"1925\"\u003e\n\u003cli data-section-id=\"jjve1n\" data-start=\"1679\" data-end=\"1731\"\u003eHeavy-duty commercial slide gate operator repair\u003c\/li\u003e\n\u003cli data-section-id=\"1dzxci0\" data-start=\"1732\" data-end=\"1784\"\u003eHeavy-duty commercial swing gate operator repair\u003c\/li\u003e\n\u003cli data-section-id=\"1bqgbhh\" data-start=\"1785\" data-end=\"1825\"\u003eIndustrial gate operator maintenance\u003c\/li\u003e\n\u003cli data-section-id=\"1hoa0zq\" data-start=\"1826\" data-end=\"1870\"\u003eUL325 gate operator service applications\u003c\/li\u003e\n\u003cli data-section-id=\"da354j\" data-start=\"1871\" data-end=\"1925\"\u003eMain control board replacement and troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-section-id=\"5ixuvj\" data-start=\"1927\" data-end=\"1943\"\u003eKey Features:\u003c\/h2\u003e\n\u003cul data-start=\"1945\" data-end=\"2587\"\u003e\n\u003cli data-section-id=\"1gvawse\" data-start=\"1945\" data-end=\"2014\"\u003eGenuine OEM LiftMaster® heavy-duty main control board service kit\u003c\/li\u003e\n\u003cli data-section-id=\"1s0ae33\" data-start=\"2015\" data-end=\"2080\"\u003eDesigned for LiftMaster® heavy-duty commercial gate operators\u003c\/li\u003e\n\u003cli data-section-id=\"j38zgl\" data-start=\"2081\" data-end=\"2145\"\u003eRestores operator control and monitored safety functionality\u003c\/li\u003e\n\u003cli data-section-id=\"11gsjvp\" data-start=\"2146\" data-end=\"2206\"\u003eSupports commercial and industrial gate operator systems\u003c\/li\u003e\n\u003cli data-section-id=\"16hzp0\" data-start=\"2207\" data-end=\"2257\"\u003eCompatible with HDSL and HDSW series operators\u003c\/li\u003e\n\u003cli data-section-id=\"11xfg57\" data-start=\"2258\" data-end=\"2325\"\u003eDirect replacement solution for service and repair applications\u003c\/li\u003e\n\u003cli data-section-id=\"420uv6\" data-start=\"2326\" data-end=\"2378\"\u003eSupports monitored entrapment protection systems\u003c\/li\u003e\n\u003cli data-section-id=\"1x9tr7f\" data-start=\"2379\" data-end=\"2453\"\u003eProfessional-grade replacement component for gate operator maintenance\u003c\/li\u003e\n\u003cli data-section-id=\"91jjvu\" data-start=\"2454\" data-end=\"2520\"\u003eDesigned for high-cycle commercial access control environments\u003c\/li\u003e\n\u003cli data-section-id=\"5aaxpf\" data-start=\"2521\" data-end=\"2587\"\u003eIdeal for troubleshooting and restoring operator functionality\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709873639599,"sku":"GPS-LM-K41-0073-000MC","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/LiftMaster_K41-0073-000MC_GatePoint_Solutions.jpg?v=1778877207"},{"product_id":"liftmaster-k41-0074-000-control-board-pivot-bracket-and-slide","title":"LiftMaster K41-0074-000 CONTROL BOARD, PIVOT BRACKET AND SLIDE","description":"\u003cdiv\u003e\n\u003cp\u003eThis replacement control board, pivot bracket, and slide assembly for LiftMaster gate operators restores core control functionality and reliable actuation.\u003c\/p\u003e\n\u003cp\u003eFrom GatePoint Solutions, a national distributor of gate operators, access control, and perimeter security equipment, this kit provides a complete replacement for the critical electronic and mechanical components in a single package.\u003c\/p\u003e\n\u003cp\u003eIn practical deployments, this assembly acts as the heart of the operator, coordinating commands, safety interlocks, and movement. The pivot bracket and slide deliver precise mechanical alignment, enabling smooth opening and closing cycles in high-traffic entrances, parking access points, and commercial gates. Replacing worn electronics and misaligned hardware helps minimize downtime and maintain consistent access control performance during service events.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e: This kit is designed for LiftMaster commercial gate operators that originally use the K41-0074-000 control board, pivot bracket, and slide configuration. It serves as a direct replacement to restore performance without replacing other components.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709873672367,"sku":"GPS-LM-K41-0074-000","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T165634.019.jpg?v=1775080600"},{"product_id":"liftmaster-k41-0075-000-dust-guard-hd-slide","title":"LiftMaster K41-0075-000 DUST GUARD, HD SLIDE","description":"\u003cdiv\u003e\n\u003cp\u003eLiftMaster K41-0075-000 Dust Guard for HD Slide is a direct replacement part that protects the gate operator’s sliding mechanism from dust, dirt, and environmental debris, helping maintain dependable performance in outdoor installations.\u003c\/p\u003e\n\u003cp\u003eIn routine maintenance and during installation of LiftMaster HD Slide systems, the dust guard serves as a barrier at the edge of the slide track. It minimizes contamination of the drive components, reducing wear on moving parts and helping preserve smooth operation in high-traffic access points, parking facilities, and commercial entryways.\u003c\/p\u003e\n\u003cp\u003eCompatibility: Designed for LiftMaster HD Slide gate operators and serves as the proper replacement for K41-0075-000 in applicable assemblies. Please reference your LiftMaster service documentation to confirm fitment with your specific HD Slide model.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709873934511,"sku":"GPS-LM-K41-0075-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T165537.405.jpg?v=1775080544"},{"product_id":"liftmaster-k41-0078-000-emi-board-with-cover-hd","title":"LiftMaster K41-0078-000 EMI BOARD WITH COVER, HD","description":"\u003cdiv\u003e\n\u003cp\u003eThis replacement EMI board with cover (K41-0078-000) provides the essential electromagnetic interference suppression and control platform for compatible LiftMaster gate operators.\u003c\/p\u003e \u003cp\u003eIn field service or new-install scenarios, the EMI board serves as the central module that helps maintain reliable gate operation by conditioning control signals within the operator cabinet. The built-in cover protects sensitive circuitry from dust and debris, supporting long-term performance in commercial entries, multi-tenant properties, and other perimeter security installations. Replacing a failed EMI board is a straightforward maintenance task that minimizes downtime while preserving existing wiring connections and enclosure layout.\u003c\/p\u003e \u003cp\u003eCompatible with LiftMaster gate operators that specify K41-0078-000 EMI board with cover. This part is intended for installers and technicians performing service on LiftMaster-based access control systems.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709873967279,"sku":"GPS-LM-K41-0078-000","price":180.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T171909.585.jpg?v=1775081956"},{"product_id":"liftmaster-k41-0082-000-hd-motor","title":"LiftMaster K41-0082-000 HD MOTOR","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K41-0082-000 HD Motor is a heavy-duty replacement motor designed to restore drive power and reliable operation in LiftMaster gate operator systems.\u003c\/p\u003e \u003cp\u003eIn practical applications, this motor serves as the central drive component that powers the opening and closing cycles of commercial and multi-tenant gates. It is used in installations where high daily cycle counts are required and where consistent torque and response are essential for secure perimeter control, such as parking facilities, employee entrances, and property access points. When replacing a failed motor, this unit helps minimize downtime and maintain smooth gate operation without replacing the entire operator.\u003c\/p\u003e \u003cp\u003eCompatibility: Compatible with LiftMaster heavy-duty gate operators that require the K41-0082-000 HD motor assembly. Verify with your operator’s service documentation to confirm fitment and wiring configuration for a proper replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709874098351,"sku":"GPS-LM-K41-0082-000","price":688.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T165244.542.jpg?v=1775080371"},{"product_id":"liftmaster-k41-0083-000-bridge-rectifier-hd-gates","title":"LiftMaster K41-0083-000 BRIDGE RECTIFIER, HD GATES","description":"\u003cdiv\u003e\n\u003cp\u003eThe K41-0083-000 Bridge Rectifier is a replacement part that converts AC input to DC power for the gate operator’s control electronics, supporting stable operation of LiftMaster heavy-duty gate systems.\u003c\/p\u003e \u003cp\u003eIn practical installations, technicians replace this component during service when the control board or power supply shows irregular DC output, motor drive glitches, or relay misbehavior. The bridge rectifier sits in the operator’s power path to provide a reliable DC rail for the drive circuitry and safety logic, enabling consistent opening and closing cycles in high-use environments such as commercial facilities, gated communities, and multi-tenant properties.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for LiftMaster heavy-duty gate operators that require the K41-0083-000 bridge rectifier, this part serves as a direct replacement to maintain proper operation of HD gate control boards and associated wiring configurations.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709874131119,"sku":"GPS-LM-K41-0083-000","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T165154.943.jpg?v=1775080322"},{"product_id":"liftmaster-k41-0085-000-cludge-assembly-hdsw24ul","title":"LiftMaster K41-0085-000 CLUDGE ASSEMBLY, HDSW24UL","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eK41-0085-000 Clutch Assembly\u003c\/strong\u003e is a replacement part for LiftMaster gate operators, providing the engagement interface between the motor drive and the gate mechanism to enable controlled torque transmission and safe operation.\u003c\/p\u003e \u003cp\u003eIn practical applications, technicians install this clutch assembly during routine maintenance or when the operator exhibits engagement issues, slip, or unusual cycling. It sits in the operator’s drive train and regulates torque transfer to the gate arm, helping protect the motor, gears, and control electronics in demanding access-control environments.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Designed for LiftMaster HDSW24UL configurations, this part serves as the direct replacement for the K41-0085-000 clutch assembly in compatible LiftMaster systems. Verify fit during a service call or installation by cross-referencing the operator model and part number.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709874163887,"sku":"GPS-LM-K41-0085-000","price":287.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T171755.367.jpg?v=1775081884"},{"product_id":"liftmaster-k41-0086-000-output-shaft-assembly-hdsw24ul","title":"LiftMaster K41-0086-000 OUTPUT SHAFT ASSEMBLY, HDSW24UL","description":"\u003cdiv\u003e\n\u003cp\u003eThe \u003cstrong\u003eK41-0086-000 Output Shaft Assembly\u003c\/strong\u003e is a replacement component for LiftMaster gate operators, delivering the essential drive connection between the motor and the operator’s drive mechanism.\u003c\/p\u003e \u003cp\u003eIn real-world installations, this shaft serves as the mechanical link that transfers torque from the motor to the drive train, enabling belt- or chain-driven movement of the gate. It is commonly replaced during routine service, after wear or damage from high-cycle operation, or when rebuilding an operator's drive train. Replacing a worn or bent output shaft helps maintain consistent operation and reduces the risk of drive-train misalignment in demanding access-control environments.\u003c\/p\u003e \u003cp\u003eCompatibility and application: This part is designed for LiftMaster systems that use the K41-0086-000 output shaft. Verify your operator model and drive configuration before replacement and follow OEM guidelines during installation. This shaft assembly is intended for professional installation by qualified technicians in commercial and multi-tenant access-control applications.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709874426031,"sku":"GPS-LM-K41-0086-000","price":392.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T171647.100.jpg?v=1775081814"},{"product_id":"liftmaster-k41-0090-000-cover-hdsw24ul","title":"LiftMaster K41-0090-000 COVER, HDSW24UL","description":"\u003cdiv\u003e\n\u003cp\u003eThis replacement cover is designed for the LiftMaster HDSW24UL gate operator and provides the external enclosure needed to restore the unit’s finished appearance after damage or loss of the original cover.\u003c\/p\u003e \u003cp\u003eIn practical use, technicians install this cover during maintenance, retrofit projects, or new installations where the HDSW24UL unit requires a standard exterior enclosure. It helps preserve access to internal components and supports a clean, professional look in commercial, industrial, and residential gate environments.\u003c\/p\u003e \u003cp\u003eCompatibility: Compatible with LiftMaster HDSW24UL gate operators.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709874458799,"sku":"GPS-LM-K41-0090-000","price":1149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T171546.425.jpg?v=1775081753"},{"product_id":"liftmaster-k41-0092-000-aps-encoder-hdsw24ul","title":"LiftMaster K41-0092-000 APS ENCODER, HDSW24UL","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eLiftMaster K41-0092-000 APS Encoder\u003c\/strong\u003e is a replacement part that provides essential position feedback to the gate operator controller, enabling accurate tracking of gate travel and reliable cycle control.\u003c\/p\u003e \u003cp\u003eIn practical terms, technicians install this encoder during service or maintenance to restore proper open\/close sequencing and to reduce issues caused by worn sensing components. The encoder feeds real-time position data to the operator’s control board, supporting smooth starts and stops, safer operation, and continued compatibility with existing LiftMaster systems in both commercial and residential settings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Designed for LiftMaster gate operators that require the K41-0092-000 APS encoder (HDSW24UL). This part serves as a direct replacement when specified by LiftMaster documentation or service notes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709874491567,"sku":"GPS-LM-K41-0092-000","price":321.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T171501.621.jpg?v=1775081708"},{"product_id":"liftmaster-k41-0095-000-motor-drive-hd-gates","title":"LiftMaster K41-0095-000 MOTOR DRIVE, HD GATES","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K41-0095-000 Motor Drive is a replacement drive module for heavy‑duty LiftMaster gate operators, providing the essential motor power and control needed to operate perimeter gates reliably.\u003c\/p\u003e \u003cp\u003eIn practical service, this drive assembly is used to restore smooth, consistent movement in high‑cycle gate systems. Technicians install the motor drive as part of the operator’s drive subsystem, where it coordinates with the control electronics, safety devices, and limit switches to enable secure opening and closing in commercial applications such as parking facilities, multi‑tenant properties, and industrial entrances.\u003c\/p\u003e \u003cp\u003eCompatibility: designed for LiftMaster heavy‑duty gate systems that require the K41-0095-000 motor drive module, commonly used in HD Gates installations within commercial and high‑demand settings.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709874524335,"sku":"GPS-LM-K41-0095-000","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T165025.744.jpg?v=1775080237"},{"product_id":"liftmaster-k41-0105-000-battery-tray-33ah-hd","title":"LiftMaster K41-0105-000 BATTERY TRAY, 33AH, HD","description":"\u003cdiv\u003e\n\u003cp\u003eGatePoint Solutions offers the \u003cstrong\u003eK41-0105-000 Battery Tray\u003c\/strong\u003e, a replacement part for LiftMaster gate operators designed to securely mount a \u003cstrong\u003e33Ah\u003c\/strong\u003e backup battery in compatible configurations.\u003c\/p\u003e \u003cp\u003eIn practical terms, this heavy-duty tray provides stable battery support and alignment with mounting points, enabling reliable backup power during outages and protecting battery connections in high-traffic entrances. It is commonly installed during routine battery service, when upgrading to a 33Ah configuration, or during replacement in commercial gates, apartment communities, and other perimeter security installations.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for LiftMaster operators that require the K41-0105-000 tray. Suitable for installations that use \u003cstrong\u003e33Ah, heavy-duty\u003c\/strong\u003e battery configurations within LiftMaster's ecosystem.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709874589871,"sku":"GPS-LM-K41-0105-000","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T164910.204.jpg?v=1775080158"},{"product_id":"liftmaster-k41-0124-000-antenna-and-connecting-wire-hd","title":"LiftMaster K41-0124-000 ANTENNA AND CONNECTING WIRE, HD","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K41-0124-000 antenna and connecting wire is a replacement component that provides the antenna element and its lead for compatible LiftMaster gate operators.\u003c\/p\u003e \u003cp\u003eIn practical terms, this assembly is used during routine maintenance or after damage to restore reliable radio signaling between remotes, keypads, or other access devices and the operator. It is installed within the operator housing or control cabinet as part of the antenna system, supporting residential, commercial, and multi-tenant installations where consistent remote control and status reporting are essential. The replacement is appropriate when the existing antenna or connecting lead has been damaged, bent, corroded, or disconnected, leading to reduced range or intermittent signals.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompatibility and installation notes:\u003c\/strong\u003e designed for LiftMaster HD gate operators that require the K41-0124-000 antenna and connecting wire assembly. Confirm your unit’s model and wiring harness matches the K41-0124-000 configuration before replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709874688175,"sku":"GPS-LM-K41-0124-000","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T171409.335.jpg?v=1775081656"},{"product_id":"liftmaster-k41-0138-000-standard-arm-hdsw24ul","title":"LiftMaster K41-0138-000 STANDARD ARM, HDSW24UL","description":"\u003cdiv\u003e\n\u003cp\u003eThe \u003cstrong\u003eK41-0138-000\u003c\/strong\u003e Standard Arm for LiftMaster HDSW24UL is a replacement arm that provides the mechanical link between a gate operator and the gate leaf, enabling reliable opening and closing cycles.\u003c\/p\u003e\n\u003cp\u003eDesigned for field replacement, this arm helps restore proper gate travel and alignment after wear or damage to the original component. It supports consistent operation in systems using LiftMaster HDSW24UL operators and is suitable for residential entrances and commercial access points where a LiftMaster perimeter solution is deployed. In everyday service, replacing a worn arm helps maintain smooth operation and reduces unnecessary strain on the operator drive components.\u003c\/p\u003e\n\u003cp\u003eCompatibility: Specifically designed for LiftMaster HDSW24UL gate operator models. Verify fitment by cross-checking the part number (K41-0138-000) with your unit and consult the operator’s installation guide for proper mounting procedures.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709874950319,"sku":"GPS-LM-K41-0138-000","price":241.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T171242.547.jpg?v=1775081570"},{"product_id":"liftmaster-k74-30762-battery-pack-12v-7a","title":"LiftMaster K74-30762 BATTERY PACK, 12V, 7A","description":"\u003cdiv\u003e\n\u003cp\u003eThis LiftMaster K74-30762 battery pack provides 12-volt backup power for select gate operators, ensuring continued operation when main power is interrupted.\u003c\/p\u003e \u003cp\u003eDesigned as a direct replacement, this pack integrates with the operator's backup system to support opening and closing cycles, access control signaling, and safety features during outages. It is suited for installation in residential gates, parking access points, and commercial perimeter setups where reliable operation is critical and downtime must be minimized.\u003c\/p\u003e \u003cp\u003eCompatibility: Direct replacement for LiftMaster K74-30762 battery packs used in LiftMaster gate operators and related access control systems that require a 12V, 7A battery pack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709878522031,"sku":"GPS-LM-K74-30762","price":182.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_74.jpg?v=1774640213"},{"product_id":"liftmaster-k75-36260-lock-and-keys","title":"LiftMaster K75-36260 LOCK AND KEYS","description":"\u003cdiv\u003e\n\u003cp\u003eThis LiftMaster \u003cstrong\u003eK75-36260\u003c\/strong\u003e Lock and Keys replacement set provides a secure, replaceable locking solution for the operator enclosure on compatible gate systems.\u003c\/p\u003e \u003cp\u003eUsed during installation or service, this lock enables controlled access to the gate operator cabinet, allowing authorized technicians to perform programming, diagnostics, and routine maintenance without exposing the internal electronics or compromising security. It is a practical part for field technicians, contractors, and property owners who maintain LiftMaster-based perimeter systems in commercial, multifamily, or industrial settings.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for LiftMaster K75-36260 lock assemblies and installations that rely on this specific locking configuration. It is suitable for use with LiftMaster gate operators and their control cabinets that originally utilized the K75-36260 locking mechanism.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709880848559,"sku":"GPS-LM-K75-36260","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_66.jpg?v=1774635597"},{"product_id":"liftmaster-k80-50295-access-door-keys-qty-2-q118","title":"LiftMaster K80-50295 ACCESS DOOR KEYS, QTY 2, Q118","description":"\u003cdiv\u003e\n\u003cp\u003eThis two-pack replacement access door keys for \u003cstrong\u003eLiftMaster\u003c\/strong\u003e gate operators match the \u003cstrong\u003eK80-50295\u003c\/strong\u003e code (Q118), delivering secure, on-site entry to enclosure doors during maintenance and service tasks.\u003c\/p\u003e\n\u003cp\u003eFor technicians, installers, property managers, and maintenance staff, these keys support routine inspections, lock servicing, and component checks inside control cabinets and operator enclosures on both residential and commercial systems. Having a spare set helps minimize downtime during service windows.\u003c\/p\u003e\n\u003cp\u003eCompatibility: Designed for \u003cstrong\u003eLiftMaster\u003c\/strong\u003e access doors keyed to \u003cstrong\u003eK80-50295\u003c\/strong\u003e (Q118). If your enclosure uses this keying system, this two-key set provides a reliable replacement or spare for field service.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709888811183,"sku":"GPS-LM-K80-50295","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_67.jpg?v=1774637985"},{"product_id":"liftmaster-k94-34778-board-to-board-wire-harness-24v","title":"LiftMaster K94-34778 BOARD TO BOARD WIRE HARNESS, 24V","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K94-34778 board-to-board wire harness, 24V, is a replacement wiring harness designed to bridge the primary control board to the adjacent board in compatible LiftMaster gate operators, ensuring reliable signal and power transfer.\u003c\/p\u003e \u003cp\u003eIn practical use, technicians install this harness during service or repair when a board-to-board connection has degraded or failed. It supports straightforward replacement in both residential and commercial access-control environments, helping to restore consistent operator performance with minimal downtime and clean routing within the control enclosure.\u003c\/p\u003e \u003cp\u003eCompatible with LiftMaster gate operator platforms that require a 24V board-to-board harness connection. When replacing, verify connector fit and routing to ensure proper alignment with the existing control architecture.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709889237167,"sku":"GPS-LM-K94-34778","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_76.jpg?v=1774640931"}],"url":"https:\/\/gatepointsolutions.com\/collections\/hdsw24ul.oembed","provider":"GatePoint Solutions","version":"1.0","type":"link"}