{"title":"CSW200U\/UL","description":"","products":[{"product_id":"liftmaster-75-50293-arm-assembly-replacement-kit","title":"LiftMaster 75-50293 Q104 Arm Assembly Replacement Kit","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eLiftMaster 75-50293 Q104 Arm Assembly Replacement Kit\u003c\/strong\u003e provides a direct replacement for the arm assembly on LiftMaster Q104 commercial gate operators, restoring the linkage that translates the operator’s motion into gate movement.\u003c\/p\u003e \u003cp\u003eIn day-to-day operation, the arm assembly is essential for consistent gate opening and closing. Worn, bent, or loose arms can lead to misalignment, slower response, or intermittent operation, increasing maintenance needs for facilities such as parking garages, apartment communities, and commercial entries. This replacement kit is used during preventive maintenance or repair to quickly restore proper geometry and reliable operation, helping technicians keep gates secure and accessible with minimal downtime.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed specifically for LiftMaster Q104 gate operators. Use with LiftMaster commercial access control systems as part of standard maintenance procedures for these units.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709858369711,"sku":"GPS-LM-75-50293","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_92.jpg?v=1774890976"},{"product_id":"liftmaster-k07-50227-output-shaft-q216","title":"LiftMaster K07-50227 OUTPUT SHAFT, Q216","description":"\u003cdiv\u003e\n\u003cp\u003eThis LiftMaster output shaft (K07-50227) is a replacement mechanical drive shaft used to transmit motor torque from the drive system to the gate mechanism in compatible LiftMaster gate operators.\u003c\/p\u003e \u003cp\u003eIn practical terms, technicians replace this shaft during routine maintenance or after wear, bending, or damage that can affect drive alignment and smooth operation. Replacing the shaft helps maintain proper engagement of the gear train, supports reliable opening and closing cycles, and reduces wear on adjacent components in high-use environments such as commercial entrances, multi-tenant properties, and busy residential gates.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed as the replacement for LiftMaster K07-50227 output shaft used in Q216 configurations. Verify the exact part number required for your operator model to ensure correct fit and performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709862138031,"sku":"GPS-LM-K07-50227","price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_5_9c7b4791-12c7-4795-882f-38eaf1bfb067.jpg?v=1777305646"},{"product_id":"liftmaster-k09-50119-output-arm-q059","title":"LiftMaster K09-50119 OUTPUT ARM, Q059","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K09-50119 Output Arm is a replacement component for LiftMaster gate operators, serving as the mechanical link that translates the operator’s motor action into gate movement.\u003c\/p\u003e \u003cp\u003eIn practical installations, this output arm is used during routine maintenance or when the original arm shows wear, deformation, or failure to actuate the gate smoothly. It plays a critical role in residential driveways, commercial entrances, and other access-controlled perimeters where reliable gate operation is essential. When paired with the appropriate control system and mounting hardware, it supports consistent opening and closing cycles and helps maintain proper alignment with the gate and safety devices.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for use with LiftMaster gate operators that require the K09-50119 output arm (Q059). This replacement is commonly used within LiftMaster installations that share this actuator linkage configuration.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709862564015,"sku":"GPS-LM-K09-50119","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_91.jpg?v=1774890834"},{"product_id":"liftmaster-k13-34729-e-box-cover","title":"LiftMaster K13-34729 E-BOX COVER","description":"\u003cdiv\u003e\n\u003cp\u003eGatePoint Solutions offers the LiftMaster K13-34729 E-BOX COVER, a replacement cover for the E-Box enclosure on compatible LiftMaster gate operators. It serves to protect the electronic control components from dust, moisture, and debris, helping maintain enclosure integrity between service intervals.\u003c\/p\u003e \u003cp\u003eIn everyday field service, this cover is used during installation, maintenance, or after minor damage to the E-Box housing. It supports reliable operation in outdoor or high-traffic environments by safeguarding the control electronics at the enclosure boundary, reducing exposure-related wear and the potential for downtime.\u003c\/p\u003e \u003cp\u003eCompatible with LiftMaster gate operators that require the K13-34729 E-BOX COVER as part of the enclosure assembly.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709865447599,"sku":"GPS-LM-K13-34729","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_60.jpg?v=1774629253"},{"product_id":"liftmaster-k13-36117-1-cludge-cover","title":"LiftMaster K13-36117-1 CLUDGE COVER","description":"\u003cdiv\u003e\n\u003cp\u003eThe K13-36117-1 Cludge Cover is a replacement exterior cover for LiftMaster gate operators, designed to replace a damaged or missing housing to restore the operator’s protected exterior.\u003c\/p\u003e \u003cp\u003eUsed by installers and maintenance technicians during field service, this cover supports quick restoration of outdoor gate installations. It helps maintain the appearance and integrity of the operator housing on entrances, parking gates, and perimeter security systems, enabling faster downtime recovery without replacing the entire unit.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for LiftMaster gate operators that require the K13-36117-1 cover. Suitable for LiftMaster systems and housing configurations that use this cover style.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709865578671,"sku":"GPS-LM-K13-36117-1","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_90.jpg?v=1774890617"},{"product_id":"liftmaster-k15-50b16ees-sprocket-50-16t-5-8-bore-q183","title":"LiftMaster K15-50B16EES SPROCKET, #50,16T, 5\/8\" BORE, Q183","description":"\u003cdiv\u003e\n\u003cp\u003eThis replacement drive sprocket for LiftMaster gate operators provides a 16-tooth drive with a 5\/8\" bore for use with a #50 chain, and carries the internal part code Q183. It is designed to restore the chain-driven portion of the operator’s drive train when wear or damage occurs.\u003c\/p\u003e \u003cp\u003eIn practical terms, this sprocket serves as the connection between the motor-driven output and the gate chain, enabling consistent, controlled gate movement in commercial installations. It is a common maintenance item in chain-driven gate systems found in parking facilities, multi-tenant properties, and other perimeter security applications, helping to minimize downtime and maintain reliable operation when replacing worn components.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for LiftMaster commercial gate operator systems that use a #50 chain and a 16-tooth sprocket with a 5\/8\" bore, including drives within the K15-50B16EES configurations. Use as a direct replacement in compatible LiftMaster drive assemblies to restore standard performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709866234031,"sku":"GPS-LM-K15-50B16EES","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_6_f93b5e46-b4c5-4cd4-9e06-e98bf27efda2.jpg?v=1777305729"},{"product_id":"liftmaster-k16-50110-v-belt-4l190-q045","title":"LiftMaster K16-50110 V-BELT, 4L190, Q045","description":"\u003cdiv\u003e\n\u003cp\u003eThis LiftMaster K16-50110 V-Belt (4L190, Q045) is a replacement drive belt designed to transmit motor output to the gate operator’s drive system, restoring proper belt-driven operation.\u003c\/p\u003e\n\u003cp\u003eIn daily maintenance and on service calls, technicians replace worn or glazed belts to maintain consistent gate cycles and reduce motor load. This belt supports reliable movement, helps prevent slip, and ensures predictable performance in commercial installations where dependable access control is critical.\u003c\/p\u003e\n\u003cp\u003eCompatibility: specifically designed to fit LiftMaster K16-50110 gate operators that require a 4L190 belt (Q045). Contractors and technicians servicing commercial gates and access control systems can use this belt as part of standard maintenance to keep operators operating at expected duty levels.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709866660015,"sku":"GPS-LM-K16-50110","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_7_1d74d37c-36c6-4eba-b594-5e5c1e263591.jpg?v=1777305825"},{"product_id":"liftmaster-k16-50195-v-belt-4l270-q175","title":"LiftMaster K16-50195 V-BELT, 4L270, Q175","description":"\u003cdiv\u003e\n\u003cp\u003eThis LiftMaster K16-50195 V-Belt (4L270, Q175) is a direct replacement drive belt for select LiftMaster gate operators.\u003c\/p\u003e\n\u003cp\u003eThe belt transmits torque from the opener motor to the drive system, enabling smooth, synchronized gate movement. It is commonly used in both commercial and residential, belt-driven gate installations where reliable travel and consistent cycle times are required. Replacing a worn or stretched belt during routine maintenance helps prevent drive slip, reduces motor load, and supports longer service life for the operator and perimeter access control system.\u003c\/p\u003e\n\u003cp\u003eCompatibility: Designed to replace the K16-50195 belt with a 4L270 cross-section on LiftMaster operators that specify this part. Verify the exact belt requirement in your operator’s manual or with GatePoint Solutions to ensure proper fit.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709866856623,"sku":"GPS-LM-K16-50195","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_8_e770f7cc-6f85-40a6-ba67-b44f5961b271.jpg?v=1777305927"},{"product_id":"liftmaster-k17-50098-motor-pulley-2-1-2-od-1-2-bore-q025","title":"LiftMaster K17-50098 MOTOR PULLEY, 2-1\/2\" OD, 1\/2\" BORE, Q025","description":"\u003cdiv\u003e\n\u003cp\u003eThis LiftMaster motor pulley, catalog designation Q025 and part number K17-50098, is a direct replacement component designed to drive the gate operator belt. It features a 2-1\/2\" outer diameter and a 1\/2\" bore to fit standard belt-driven drive assemblies.\u003c\/p\u003e \u003cp\u003eIn practical terms, this pulley is used during service and installation to restore proper belt engagement and torque transfer. It supports reliable gate operation in both residential and commercial settings where LiftMaster belt-driven drive trains are employed, helping to minimize belt wear and downtime when pulleys wear or become damaged.\u003c\/p\u003e \u003cp\u003eCompatibility and application: Suitable for LiftMaster gate operators that require a 2-1\/2\" OD, 1\/2\" bore motor pulley and identified as K17-50098 in LiftMaster catalogs. When replacing, verify the bore size and mounting interface to ensure a correct fit within the drive train.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709868200111,"sku":"GPS-LM-K17-50098","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T163226.741.jpg?v=1775079154"},{"product_id":"liftmaster-k17-50223-gear-reducer-pulley-q209","title":"LiftMaster K17-50223 GEAR REDUCER PULLEY, Q209","description":"\u003cdiv\u003e\n\u003cp\u003eThis replacement gear reducer pulley is designed to serve as a critical component in the LiftMaster K17-50223 gear reducer assembly for Q209 gate operators, enabling accurate torque transfer and reliable belt-driven operation.\u003c\/p\u003e\n\u003cp\u003eIn practical applications, technicians use this pulley during maintenance or rebuild work on commercial or industrial access control systems that rely on LiftMaster gear reducer configurations. Replace a worn or damaged pulley to restore proper belt alignment and drive engagement within the reducer train, supporting smooth gate travel and consistent opening and closing cycles. Proper installation helps minimize belt wear and downtime in demanding perimeter security environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Designed for use with LiftMaster K17-50223 gear reducer pulleys in Q209 operator configurations. Verify fit with your specific LiftMaster operator model and refer to the installation manual during replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709868331183,"sku":"GPS-LM-K17-50223","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T163110.243.jpg?v=1775079079"},{"product_id":"liftmaster-k19-50040-chain-50","title":"LiftMaster K19-50040 CHAIN, #50","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K19-50040 Chain, #50, is a replacement drive chain designed to transmit motor rotation to the gate mechanism in compatible LiftMaster gate operators.\u003c\/p\u003e\n\u003cp\u003eIn practical use, this chain supports chain-driven gate systems found on commercial, multi-tenant, and multi-gate installations. Technicians replace worn or stretched chains to restore reliable opening and closing cycles, minimize downtime, and maintain proper drive tension and alignment between the operator and the gate mechanism.\u003c\/p\u003e\n\u003cp\u003eCompatibility: Specifically designed for LiftMaster gate operators that require the K19-50040 chain assembly, identified as #50. Use this part when performing maintenance or replacement on LiftMaster systems that call for this chain configuration.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709869674671,"sku":"GPS-LM-K19-50040","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_9_87f03131-78ce-49d2-97b9-a9601db00218.jpg?v=1777305988"},{"product_id":"liftmaster-k1d6761-1ccmc-logic-board-ac","title":"LiftMaster K1D6761-1CCMC AC Logic Control Board Replacement Kit","description":"\u003cp data-start=\"16\" data-end=\"516\"\u003eThe \u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003eLiftMaster\u003c\/span\u003e\u003c\/span\u003e K1D6761-1CCMC is a genuine OEM AC logic control board replacement kit designed for LiftMaster® commercial slide and swing gate operators manufactured after 2016. Engineered for professional service, repair, and replacement applications, this control board restores essential gate operator functionality including gate logic control, monitored safety communication, accessory integration, and system operation for compatible commercial access control systems.\u003c\/p\u003e\n\u003cp data-start=\"518\" data-end=\"930\"\u003eDesigned for LiftMaster® AC commercial gate operators, the K1D6761-1CCMC replacement board is backwards compatible with select older second-generation operator platforms when properly configured with required UL325 monitored entrapment protection devices. This replacement kit supports monitored photoelectric safety sensors and monitored edge sensors required for compliant operation in commercial gate systems.\u003c\/p\u003e\n\u003cp data-start=\"932\" data-end=\"1271\"\u003eFor UL325 compliance, monitored photoelectric sensors or monitored edge sensors on the OPEN entrapment zone are mandatory. Failure to install monitored entrapment protection devices may prevent the operator from functioning properly. Always verify compatibility using the installation manual or replacement parts diagram prior to ordering.\u003c\/p\u003e\n\u003ch3 data-section-id=\"tvikk1\" data-start=\"1273\" data-end=\"1291\"\u003eSpecifications:\u003c\/h3\u003e\n\u003cul data-start=\"1293\" data-end=\"1821\"\u003e\n\u003cli data-section-id=\"1b9y9cc\" data-start=\"1293\" data-end=\"1323\"\u003ePart Number: K1D6761-1CCMC\u003c\/li\u003e\n\u003cli data-section-id=\"k4jwk8\" data-start=\"1324\" data-end=\"1380\"\u003eProduct Type: AC Logic Control Board Replacement Kit\u003c\/li\u003e\n\u003cli data-section-id=\"vlnca6\" data-start=\"1381\" data-end=\"1409\"\u003eManufacturer: LiftMaster\u003c\/li\u003e\n\u003cli data-section-id=\"1hg1vj9\" data-start=\"1410\" data-end=\"1466\"\u003eApplication: Commercial Slide \u0026amp; Swing Gate Operators\u003c\/li\u003e\n\u003cli data-section-id=\"9dcm1c\" data-start=\"1467\" data-end=\"1531\"\u003eCompatibility Requirement: Operators Manufactured After 2016\u003c\/li\u003e\n\u003cli data-section-id=\"1m0gqdv\" data-start=\"1532\" data-end=\"1561\"\u003eOEM Replacement Part: Yes\u003c\/li\u003e\n\u003cli data-section-id=\"d0r2gk\" data-start=\"1562\" data-end=\"1595\"\u003eGenuine LiftMaster® Part: Yes\u003c\/li\u003e\n\u003cli data-section-id=\"1reb2a0\" data-start=\"1596\" data-end=\"1672\"\u003eBackwards Compatible: Compatible with Select Second-Generation Operators\u003c\/li\u003e\n\u003cli data-section-id=\"1kn8tfa\" data-start=\"1673\" data-end=\"1698\"\u003eUL325 Compatible: Yes\u003c\/li\u003e\n\u003cli data-section-id=\"k1zo5l\" data-start=\"1699\" data-end=\"1769\"\u003eMonitored Safety Device Requirement: Required for Proper Operation\u003c\/li\u003e\n\u003cli data-section-id=\"6d1tif\" data-start=\"1770\" data-end=\"1821\"\u003eInstallation Type: Replacement \/ Service Repair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-section-id=\"1sz9osj\" data-start=\"1823\" data-end=\"1859\"\u003eCompatible Models \/ Applications:\u003c\/h3\u003e\n\u003cp data-start=\"1861\" data-end=\"1963\"\u003eCompatible with various LiftMaster® commercial slide and swing gate operators manufactured after 2016.\u003c\/p\u003e\n\u003cp data-start=\"1965\" data-end=\"1986\"\u003eApplications include:\u003c\/p\u003e\n\u003cul data-start=\"1988\" data-end=\"2285\"\u003e\n\u003cli data-section-id=\"vfsap5\" data-start=\"1988\" data-end=\"2029\"\u003eCommercial slide gate operator repair\u003c\/li\u003e\n\u003cli data-section-id=\"13wotq2\" data-start=\"2030\" data-end=\"2071\"\u003eCommercial swing gate operator repair\u003c\/li\u003e\n\u003cli data-section-id=\"zy76av\" data-start=\"2072\" data-end=\"2120\"\u003eUL325 gate operator upgrades and maintenance\u003c\/li\u003e\n\u003cli data-section-id=\"da354j\" data-start=\"2121\" data-end=\"2175\"\u003eMain control board replacement and troubleshooting\u003c\/li\u003e\n\u003cli data-section-id=\"1ucix2\" data-start=\"2176\" data-end=\"2233\"\u003eCommercial access control system service applications\u003c\/li\u003e\n\u003cli data-section-id=\"4qyblh\" data-start=\"2234\" data-end=\"2285\"\u003eSecond-generation LiftMaster® operator upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-section-id=\"5ixuvj\" data-start=\"2287\" data-end=\"2303\"\u003eKey Features:\u003c\/h3\u003e\n\u003cul data-start=\"2305\" data-end=\"3060\"\u003e\n\u003cli data-section-id=\"1dpjuqw\" data-start=\"2305\" data-end=\"2371\"\u003eGenuine OEM LiftMaster® AC logic control board replacement kit\u003c\/li\u003e\n\u003cli data-section-id=\"5moisg\" data-start=\"2372\" data-end=\"2430\"\u003eDesigned for commercial slide and swing gate operators\u003c\/li\u003e\n\u003cli data-section-id=\"j38zgl\" data-start=\"2431\" data-end=\"2495\"\u003eRestores operator control and monitored safety functionality\u003c\/li\u003e\n\u003cli data-section-id=\"1i7bowb\" data-start=\"2496\" data-end=\"2569\"\u003eBackwards compatible with select second-generation operator platforms\u003c\/li\u003e\n\u003cli data-section-id=\"1y3a2xb\" data-start=\"2570\" data-end=\"2628\"\u003eSupports UL325 monitored entrapment protection systems\u003c\/li\u003e\n\u003cli data-section-id=\"1ru6fjf\" data-start=\"2629\" data-end=\"2707\"\u003eCompatible with monitored photoelectric sensors and monitored edge sensors\u003c\/li\u003e\n\u003cli data-section-id=\"11xfg57\" data-start=\"2708\" data-end=\"2775\"\u003eDirect replacement solution for service and repair applications\u003c\/li\u003e\n\u003cli data-section-id=\"1g3nzqr\" data-start=\"2776\" data-end=\"2826\"\u003eDesigned for operators manufactured after 2016\u003c\/li\u003e\n\u003cli data-section-id=\"cq1ydj\" data-start=\"2827\" data-end=\"2912\"\u003eProfessional-grade replacement component for commercial gate operator maintenance\u003c\/li\u003e\n\u003cli data-section-id=\"bffw53\" data-start=\"2913\" data-end=\"2982\"\u003eSupports accessory integration and operator communication systems\u003c\/li\u003e\n\u003cli data-section-id=\"xiaakf\" data-start=\"2983\" data-end=\"3060\"\u003eIdeal for troubleshooting and restoring commercial operator functionality\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709869838511,"sku":"GPS-LM-K1D6761-1CCMC","price":512.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/LiftMaster_K1D6761-1CCMC_GatePoint_Solutions.jpg?v=1778877008"},{"product_id":"liftmaster-k1d8247-hall-effect-sensor-board","title":"LiftMaster K1D8247 HALL EFFECT SENSOR BOARD","description":"\u003cdiv\u003e\n\u003cp\u003eGatePoint Solutions presents the LiftMaster K1D8247 Hall Effect Sensor Board, a replacement sensing module that provides position feedback to the operator control system.\u003c\/p\u003e\n\u003cp\u003eUsed in LiftMaster gate operators to detect end-of-travel and deliver reliable signals to the controller, this sensor board is intended for maintenance or replacement when the existing Hall-effect component has degraded. It sits in the operator’s sensing circuit and works with the control logic to ensure accurate travel limits and safe operation of the gate or barrier in typical commercial or multi-site installations.\u003c\/p\u003e\n\u003cp\u003eCompatibility: Designed for LiftMaster gate operators that require the K1D8247 Hall Effect Sensor Board. Verify compatibility with your model by cross-checking the part number on the current sensor assembly or by consulting GatePoint Solutions support.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709870002351,"sku":"GPS-LM-K1D8247","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_10_f3cdf289-1dd8-4ee4-ae0a-1f8dde0e7e3d.jpg?v=1777306152"},{"product_id":"liftmaster-k1d8387-1cc-expansion-board-ul325","title":"LiftMaster K1D8387-1CC EXPANSION BOARD, UL325","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K1D8387-1CC Expansion Board is a replacement module that extends the control capabilities of compatible gate operators, providing additional interface options within the controller enclosure.\u003c\/p\u003e \u003cp\u003eIn practical installations, this expansion board is used during system upgrades or field replacements to maintain reliable access control in commercial gates, parking facilities, and multi-tenant properties. It helps technicians preserve existing controller architecture while enabling expanded integration with peripheral devices and ancillary systems, supporting smoother retrofits and reduced downtime.\u003c\/p\u003e \u003cp\u003eCompatible with LiftMaster gate operators that support the K1D8387-1CC expansion board; verify model compatibility in the operator’s service manual before installation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709870067887,"sku":"GPS-LM-K1D8387-1CC","price":217.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_59.jpg?v=1774628640"},{"product_id":"liftmaster-k1d8402-1cc-motor-drive-board-1ph-sl3000-csw200","title":"LiftMaster K1D8402-1CC MOTOR DRIVE BOARD, 1PH, SL3000, CSW200","description":"\u003cdiv\u003e\n\u003cp\u003eThis motor drive board is a replacement drive electronics module for LiftMaster gate operators, handling motor power delivery and drive timing in 1‑phase configurations used by SL3000 and CSW200 installations.\u003c\/p\u003e \u003cp\u003eIn practical deployments, it serves as the central control component in the operator’s drive path. Technicians install it during repairs or retrofits to restore reliable gate motion, ensure smooth ramping and starting, and coordinate with safety devices, limit switches, and control logic in busy entrances, parking facilities, and gated properties where consistent access control is critical.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for use with LiftMaster SL3000 and CSW200 systems. This board is intended for installations that rely on these model families and should be selected per the operator’s service documentation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709870231727,"sku":"GPS-LM-K1D8402-1CC","price":358.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/LiftMaster-Placeholder-Product-Image_1024x_65d4e420-b55e-4181-b7d0-5cb0b18a945b.jpg?v=1770300451"},{"product_id":"liftmaster-k20-1050b-1rsx-motor-1-2hp-ac","title":"LiftMaster K20-1050B-1RSX MOTOR, 1\/2HP, AC","description":"\u003cdiv\u003eThis LiftMaster K20-1050B-1RSX Motor, 1\/2 HP, AC, is a replacement motor designed to restore the driving function of compatible LiftMaster gate operators. In practical terms, it serves as the primary drive for gate movement in commercial applications, powering the opening and closing of perimeter gates in settings such as gated communities, multi-family properties, and light-industrial installations. It is used during field service to replace worn or failed motors and to maintain consistent cycle performance when integrated with the operator’s control electronics and safety interlocks. Proper installation requires isolating power and following the manufacturer’s replacement procedures to preserve system safety and warranty compliance. Compatibility: Compatible with LiftMaster K20-1050B-1RSX gate operators and suitable for select LiftMaster commercial configurations.\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709870330031,"sku":"GPS-LM-K20-1050B-1RSX","price":448.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T162503.093.jpg?v=1775078710"},{"product_id":"liftmaster-k23-50099-limit-switch","title":"LiftMaster K23-50099 LIMIT SWITCH","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K23-50099 limit switch is a replacement end-of-travel switch that signals the gate operator to stop at the programmed travel limit.\u003c\/p\u003e\n\u003cp\u003eUsed during installation, maintenance, or field service, it restores accurate gate position sensing and helps prevent over-travel, reducing wear and downtime in high-cycle residential, commercial, and light-industrial systems.\u003c\/p\u003e\n\u003cp\u003eCompatible with LiftMaster gate operators that use the K23-50099 limit switch in their end-of-travel sensing circuit.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709871247535,"sku":"GPS-LM-K23-50099","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-03-30T142151.624.jpg?v=1774898518"},{"product_id":"liftmaster-k29c-65au2415-motor-capacitor-q027","title":"LiftMaster K29C-65AU2415 MOTOR CAPACITOR, Q027","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eLiftMaster K29C-65AU2415 motor capacitor (Q027)\u003c\/strong\u003e is a replacement electrical component that powers the motor’s start and run circuits in compatible gate operators.\u003c\/p\u003e\n\u003cp\u003eUsed during routine maintenance or after capacitor-related failure, this part helps restore reliable gate startup, smooth operation, and consistent torque under typical loads. It’s a practical solution for service calls on LiftMaster gate systems that rely on the K29C-65AU2415 motor, supporting both residential and commercial installations where uptime matters.\u003c\/p\u003e\n\u003cp\u003eCompatibility: Designed specifically for LiftMaster gate operators that specify the K29C-65AU2415 motor capacitor, part number Q027. Use this replacement when the motor pack calls for that exact capacitor to maintain proper system performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709871444143,"sku":"GPS-LM-K29C-65AU2415","price":135.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T162314.864.jpg?v=1775078662"},{"product_id":"liftmaster-k32-37433-1-gear-reducer-40-30-1","title":"LiftMaster K32-37433-1 GEAR REDUCER, 40-30:1","description":"\u003cdiv\u003e\n\u003cp\u003eThe K32-37433-1 Gear Reducer for LiftMaster gate operators provides a 40-30:1 reduction, converting high-speed motor torque into controlled, reliable gate movement.\u003c\/p\u003e \u003cp\u003eIn typical installations, this gear reducer sits in the operator’s drive train between the motor and the gate mechanism, delivering smoother starts, steadier travel, and the torque needed to move longer or heavier gates. It helps maintain consistent performance in demanding access-control environments and serves as a practical replacement when the existing reduction gear wears or fails in LiftMaster systems.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed as a replacement part for LiftMaster gate operators that utilize the K32-37433-1 gear reducer. To confirm fit, verify your operator model and consult the manufacturer’s diagrams or service documentation before installation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709872754863,"sku":"GPS-LM-K32-37433-1","price":332.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_11_fa88aa5d-6161-4765-b4ea-726b886364b5.jpg?v=1777306256"},{"product_id":"liftmaster-k73-37195-chassis-csw200","title":"LiftMaster K73-37195 CHASSIS, CSW200","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K73-37195 CSW200 chassis is a replacement chassis that provides the structural frame for the CSW200 gate operator, supporting and aligning internal components within the housing and ensuring proper mounting of the drive assembly.\u003c\/p\u003e \u003cp\u003eIn practical applications, technicians use this chassis during service or refurbishment to restore mounting integrity after damage or component upgrades in commercial sliding gate systems. It supports reliable operation in demanding access-control environments, such as industrial properties, gated facilities, and high-traffic entry points where consistent alignment and enclosure integrity are essential.\u003c\/p\u003e \u003cp\u003eCompatibility: Direct replacement for LiftMaster CSW200 operators (K73-37195). Designed to fit CSW200 mounting interfaces and suitable for LiftMaster commercial gate systems and related perimeter security equipment.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709878096047,"sku":"GPS-LM-K73-37195","price":446.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_12_cc122401-7b1f-4678-9c0b-553f5041a434.jpg?v=1777306796"},{"product_id":"liftmaster-k75-36260-lock-and-keys","title":"LiftMaster K75-36260 LOCK AND KEYS","description":"\u003cdiv\u003e\n\u003cp\u003eThis LiftMaster \u003cstrong\u003eK75-36260\u003c\/strong\u003e Lock and Keys replacement set provides a secure, replaceable locking solution for the operator enclosure on compatible gate systems.\u003c\/p\u003e \u003cp\u003eUsed during installation or service, this lock enables controlled access to the gate operator cabinet, allowing authorized technicians to perform programming, diagnostics, and routine maintenance without exposing the internal electronics or compromising security. It is a practical part for field technicians, contractors, and property owners who maintain LiftMaster-based perimeter systems in commercial, multifamily, or industrial settings.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for LiftMaster K75-36260 lock assemblies and installations that rely on this specific locking configuration. It is suitable for use with LiftMaster gate operators and their control cabinets that originally utilized the K75-36260 locking mechanism.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709880848559,"sku":"GPS-LM-K75-36260","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_66.jpg?v=1774635597"},{"product_id":"liftmaster-k75-37300-2-e-box","title":"LiftMaster K75-37300-2 E-BOX","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K75-37300-2 E-BOX is a replacement electronic enclosure and control module for select LiftMaster gate operators, delivering the core logic needed for secure and reliable gate operation.\u003c\/p\u003e \u003cp\u003eUsed in service and replacement scenarios, this E-BOX sits within the operator to manage command processing between control inputs, safety devices, and the motor. Technicians and installers typically replace this module when the original electronics fail or show intermittent behavior, helping to restore consistent performance in both commercial and residential access control installations.\u003c\/p\u003e \u003cp\u003eCompatible with LiftMaster gate operators that use the K75-37300-2 E-BOX assembly; when replacing, confirm model compatibility against the operator schematic or parts list to ensure proper fit and function.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709881045167,"sku":"GPS-LM-K75-37300-2","price":288.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_12_cc122401-7b1f-4678-9c0b-553f5041a434.jpg?v=1777306796"},{"product_id":"liftmaster-k75-50121-cludge-aram-clamp-and-handle-q061","title":"LiftMaster K75-50121 CLUDGE ARAM CLAMP AND HANDLE, Q061","description":"\u003cdiv\u003e\n\u003cp\u003eThis replacement clamp and handle assembly (K75-50121, also cataloged as Q061) for LiftMaster gate operators restores the clamp-and-handle hardware that secures the arm and provides the operator interface during service.\u003c\/p\u003e \u003cp\u003eIn practical use, technicians replace this component during planned maintenance or after wear to preserve arm alignment and reliable gate cycles. It supports smooth operation on swing-style gate configurations and other LiftMaster-based access control setups, helping facilities maintain consistent throughput in parking lots, gated communities, and commercial properties.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompatibility and applications:\u003c\/strong\u003e Designed for use with LiftMaster gate operator systems. Compatible with select LiftMaster commercial operators and related control hardware; verify fit with your specific model and service documentation. Available from GatePoint Solutions, a national distributor of gate operators, access control systems, and perimeter security equipment.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709881602223,"sku":"GPS-LM-K75-50121","price":153.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_85.jpg?v=1774889359"},{"product_id":"liftmaster-k75-50224-gear-box-kit-70","title":"LiftMaster K75-50224 GEAR BOX KIT, #70, Q210","description":"\u003cdiv\u003e\n\u003cp\u003eThe K75-50224 Gear Box Kit for LiftMaster gate operators is a direct replacement gearbox assembly designed to restore proper gear engagement and drive to the gate system.\u003c\/p\u003e \u003cp\u003eIn routine maintenance and field service, technicians use this kit when the LiftMaster gearbox shows wear, gear misalignment, or noise that impacts gate operation. Replacing the gearbox helps reestablish smooth torque transfer from the motor to the gate, supporting reliable opening and closing cycles in high-use environments such as commercial entrances, multi-tenant properties, and residential gated communities.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for LiftMaster gate operators that specify the K75-50224 Gear Box Kit. Verify your operator’s documentation to confirm fit and proper installation within your LiftMaster system. This replacement part is distributed through GatePoint Solutions for contractors, installers, and property owners seeking a dependable Gear Box Kit option.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709882814639,"sku":"GPS-LM-K75-50224","price":567.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_13_285b79b8-5c5a-4336-949f-4de9896b29a0.jpg?v=1777306985"},{"product_id":"liftmaster-k77-37635-sprocket-and-chain-kit","title":"LiftMaster K77-37635 SPROCKET AND CHAIN KIT","description":"\u003cdiv\u003e\n\u003cp\u003eThis replacement sprocket and chain kit for LiftMaster gate operators provides the drive chain and sprocket components needed to restore reliable gate motion. Identified by part K77-37635, it is designed for chain-driven drive systems that power the gate arm in commercial and residential applications.\u003c\/p\u003e \u003cp\u003eUsed during scheduled maintenance, after wear on the drive chain, or following performance issues such as slipping or binding, this kit helps technicians reestablish proper drive tension and alignment. It supports consistent opening and closing cycles, reduces downtime, and is suitable for field service by professional installers, maintenance teams, and property managers overseeing perimeter security systems.\u003c\/p\u003e \u003cp\u003eCompatibility: Compatible with LiftMaster gate operators that use the K77-37635 sprocket-and-chain configuration. Please confirm model compatibility with your operator’s service documentation and follow standard installation procedures for proper chain tension and alignment.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709884879023,"sku":"GPS-LM-K77-37635","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_14_ece726a8-d3c5-4b87-870f-d1fdf61bd53d.jpg?v=1777312873"},{"product_id":"liftmaster-k77-37636-junction-box-with-on-off-and-receptacle","title":"LiftMaster K77-37636 Junction Box, With On\/Off And Receptacle","description":"\u003cdiv\u003e\n\u003cp\u003eThe K77-37636 Junction Box, with On\/Off and Receptacle, is a replacement electrical enclosure that provides integrated power control and a convenient built-in outlet for gate operators and related access-control components.\u003c\/p\u003e \u003cp\u003eIn practical applications, this junction box acts as the central wiring node within the operator's control enclosure, enabling on-site shutoff and power connections for the operator and accessories. The design supports straightforward field installation, quick replacement of damaged enclosures, and reliable power distribution in both commercial and residential gate systems.\u003c\/p\u003e \u003cp\u003eCompatible with LiftMaster gate operator systems that rely on this enclosure design; it is intended as a direct replacement to restore control wiring and power distribution within the operator's control box.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709884911791,"sku":"GPS-LM-K77-37636","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_15_8a1725dc-7a80-43b4-ae86-4499aff6a25c.jpg?v=1777312995"},{"product_id":"liftmaster-k77-37637-cover","title":"LiftMaster K77-37637 Cover","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K77-37637 Cover is a replacement enclosure designed to protect the K77-37637 module from dust, moisture, and incidental damage, helping maintain the integrity of the gate operator enclosure.\u003c\/p\u003e \u003cp\u003eIn practical terms, this cover is used during maintenance and service when the original enclosure is damaged or worn. It helps preserve system reliability by safeguarding internal electronics and control components from the elements and debris, supporting longer life of the gate system in day-to-day operation.\u003c\/p\u003e \u003cp\u003eCompatibility: Specifically designed to fit LiftMaster K77-37637 assemblies and used with LiftMaster gate operators that employ this enclosure. GatePoint Solutions offers this replacement cover as part of its LiftMaster replacement parts catalog for reliable field service and installation projects.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709884944559,"sku":"GPS-LM-K77-37637","price":624.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/LiftMaster-Placeholder-Product-Image_1024x_65d4e420-b55e-4181-b7d0-5cb0b18a945b.jpg?v=1770300451"},{"product_id":"liftmaster-k77-37638-antenna-and-coax-cable","title":"LiftMaster K77-37638 ANTENNA AND COAX CABLE","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K77-37638 Antenna and Coax Cable is a replacement component designed to restore reliable RF reception for compatible LiftMaster gate operators.\u003c\/p\u003e\n\u003cp\u003eIn real-world installations, this antenna and coax assembly serves as the critical link between the operator and remote transmitters. It is used during service and maintenance when the original antenna or coax is damaged, corroded, or intermittently failing, helping maintain consistent remote-control performance for entrances, parking gates, and perimeter barriers. Proper installation routes the coax from the operator chassis to a secure exterior mounting location, with the antenna positioned to optimize signal reception in the site’s layout.\u003c\/p\u003e\n\u003cp\u003eCompatibility: Direct replacement part for LiftMaster gate operators that require the K77-37638 antenna assembly.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709884977327,"sku":"GPS-LM-K77-37638","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T160543.745.jpg?v=1775077553"},{"product_id":"liftmaster-k77-37683-main-board-standoffs-qty-10","title":"LiftMaster K77-37683 MAIN BOARD STANDOFFS, QTY 10","description":"\u003cdiv\u003e\n\u003cp\u003eThese are replacement main board standoffs for the LiftMaster K77-37683, designed to securely mount the main control board within the operator enclosure while maintaining proper spacing from the mounting surface.\u003c\/p\u003e \u003cp\u003eIn practical installations, technicians use these standoffs during service or board replacement to preserve correct board height and alignment with mounting posts and connectors. The 10-pack provides ready-to-use spacers for routine maintenance, field repairs, or new installations, helping ensure the control board is properly seated and protected from misalignment during reassembly.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for use with the LiftMaster K77-37683 main board assembly in compatible LiftMaster gate operators. Suitable for contractors, installers, technicians, and property owners performing service or replacement work, available from GatePoint Solutions in a 10‑pack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709885010095,"sku":"GPS-LM-K77-37683","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T160446.647.jpg?v=1775077494"},{"product_id":"liftmaster-k77-37693-wire-harnesses-ac-csw200-sl3000","title":"LiftMaster K77-37693 WIRE HARNESSES, AC, CSW200, SL3000","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eK77-37693 AC wire harness kit\u003c\/strong\u003e from GatePoint Solutions is a replacement wiring assembly for LiftMaster CSW200 and SL3000 gate operators, designed to restore and maintain essential electrical connections between the control system and field components.\u003c\/p\u003e \u003cp\u003eIn practical applications, technicians install these harnesses during maintenance or after damage to worn, chafed, or corroded wiring. The AC harness provides reliable power delivery and signaling paths to safety devices, actuators, and related control peripherals, supporting consistent performance in commercial and multi-tenant environments where gates see regular use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompatibility and use\u003c\/strong\u003e: Designed specifically for LiftMaster CSW200 and SL3000 operators. When replacing, verify that connectors and harness routing match your existing setup, and follow proper safety procedures prior to power restoration.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709885042863,"sku":"GPS-LM-K77-37693","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T160334.268.jpg?v=1775077421"},{"product_id":"liftmaster-k77-38078-cover","title":"LiftMaster K77-38078 Cover","description":"\u003cdiv\u003e\n\u003cp\u003eThis replacement cover for the LiftMaster K77-38078 enclosure provides a protective exterior for the gate operator housing and helps shield internal components from dust, moisture, and debris in outdoor or semi-exposed installations.\u003c\/p\u003e\n\u003cp\u003eIn practical terms, the cover supports maintenance workflows by restoring the enclosure's appearance after damage and ensuring ongoing protection for the installation. It is used during service or replacement to quickly restore a finished, professional look and reliable enclosure protection, minimizing downtime for commercial gate systems.\u003c\/p\u003e\n\u003cp\u003eCompatibility: Designed for use with LiftMaster gate operator enclosures that require the K77-38078 cover. This part is suitable for commercial and multi-tenant properties where this cover is specified as part of the system’s enclosure components.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709885730991,"sku":"GPS-LM-K77-38078","price":682.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/LiftMaster-Placeholder-Product-Image_1024x_65d4e420-b55e-4181-b7d0-5cb0b18a945b.jpg?v=1770300451"},{"product_id":"liftmaster-k80-50295-access-door-keys-qty-2-q118","title":"LiftMaster K80-50295 ACCESS DOOR KEYS, QTY 2, Q118","description":"\u003cdiv\u003e\n\u003cp\u003eThis two-pack replacement access door keys for \u003cstrong\u003eLiftMaster\u003c\/strong\u003e gate operators match the \u003cstrong\u003eK80-50295\u003c\/strong\u003e code (Q118), delivering secure, on-site entry to enclosure doors during maintenance and service tasks.\u003c\/p\u003e\n\u003cp\u003eFor technicians, installers, property managers, and maintenance staff, these keys support routine inspections, lock servicing, and component checks inside control cabinets and operator enclosures on both residential and commercial systems. Having a spare set helps minimize downtime during service windows.\u003c\/p\u003e\n\u003cp\u003eCompatibility: Designed for \u003cstrong\u003eLiftMaster\u003c\/strong\u003e access doors keyed to \u003cstrong\u003eK80-50295\u003c\/strong\u003e (Q118). If your enclosure uses this keying system, this two-key set provides a reliable replacement or spare for field service.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709888811183,"sku":"GPS-LM-K80-50295","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_67.jpg?v=1774637985"},{"product_id":"liftmaster-k94-34778-board-to-board-wire-harness-24v","title":"LiftMaster K94-34778 BOARD TO BOARD WIRE HARNESS, 24V","description":"\u003cdiv\u003e\n\u003cp\u003eThe LiftMaster K94-34778 board-to-board wire harness, 24V, is a replacement wiring harness designed to bridge the primary control board to the adjacent board in compatible LiftMaster gate operators, ensuring reliable signal and power transfer.\u003c\/p\u003e \u003cp\u003eIn practical use, technicians install this harness during service or repair when a board-to-board connection has degraded or failed. It supports straightforward replacement in both residential and commercial access-control environments, helping to restore consistent operator performance with minimal downtime and clean routing within the control enclosure.\u003c\/p\u003e \u003cp\u003eCompatible with LiftMaster gate operator platforms that require a 24V board-to-board harness connection. When replacing, verify connector fit and routing to ensure proper alignment with the existing control architecture.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709889237167,"sku":"GPS-LM-K94-34778","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_76.jpg?v=1774640931"},{"product_id":"liftmaster-k94-37449-reset-button-with-id-resistor","title":"LiftMaster K94-37449 Reset Button, With ID Resistor","description":"\u003cdiv\u003e\n\u003cp\u003eThis LiftMaster K94-37449 Reset Button, With ID Resistor, is a direct replacement component for compatible LiftMaster gate operator control systems, providing a reliable reset input and the embedded identification resistor required by the host controller.\u003c\/p\u003e \u003cp\u003eIn practical terms, technicians use this part during maintenance or after a fault to restore normal operation of commercial gate systems. It plays a key role on the control board by enabling a clean reset sequence and supporting the system’s identification scheme, helping ensure proper communication between the controller and field components. This replacement part is designed for field service work and supports quick, accurate installations on occupied properties where downtime must be minimized.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for use with LiftMaster commercial gate operators and control boards that require the K94-37449 reset button with ID resistor. When selecting a replacement component, confirm that the system calls for this exact part to ensure proper fit and function.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709890121903,"sku":"GPS-LM-K94-37449","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download_16_db58978a-af32-4c19-9725-08e9ddb050ba.jpg?v=1777313374"},{"product_id":"liftmaster-k94-37461-alarm-and-harness","title":"LiftMaster K94-37461 ALARM AND HARNESS","description":"\u003cdiv\u003e\n\u003cp\u003eGatePoint Solutions presents the LiftMaster K94-37461 Alarm and Harness, a replacement wiring and alarm assembly for LiftMaster gate operators that restores essential signaling and connections within the system.\u003c\/p\u003e \u003cp\u003eIn practical terms, this part is used during field service and routine maintenance when the original harness or alarm components have degraded or failed. It provides the required connections between the operator’s control electronics and the alarm circuit and status indicators, helping to maintain reliable gate operation and accurate fault signaling during cycles and alerts. Technicians, contractors, and property managers rely on this replacement to minimize downtime on both residential and light commercial installations.\u003c\/p\u003e \u003cp\u003eCompatibility: Designed for LiftMaster gate operators that require the K94-37461 alarm and harness. Verify compatibility with your specific model by consulting your operator’s service documentation or contacting GatePoint Solutions for application guidance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LiftMaster","offers":[{"title":"Default Title","offer_id":46709890187439,"sku":"GPS-LM-K94-37461","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/2394\/0015\/files\/download-2026-04-01T155738.111.jpg?v=1775077065"}],"url":"https:\/\/gatepointsolutions.com\/collections\/csw200u-ul.oembed","provider":"GatePoint Solutions","version":"1.0","type":"link"}